Overview
Dulux Trade High Gloss paint is a solvent-based gloss with excellent flow and coverage and a durable high gloss finish. Use it on interior and exterior wood and metal surfaces, with
- Excellent durability and flow
- For use on interior and exterior wood and metal
- High gloss finish
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior & Exterior |
| Recommended Use | Interior or exterior wood or metal |
| Base | Oil-Based |
| Coverage | Up to 18m2 per litre |
| Drying Time | 4-6 Hours |
| Re-Coat Time | 16-24 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush, Roller |
| VOC Levels | High |
| Clean Up | Remove as much product as possible from the equipment before cleaning following manufacturer's recommendations |
Preparation
Make sure that the surfaces to be painted are sound, clean and dry. It is particularly important that new surfaces are fully dry.
- All defective or poorly adhering material, dirt, grease and wax must be completely removed.
- Prime new or bare surfaces with an appropriate Dulux Trade primer and treat any knots in wood with an appropriate knotting solution.
- Rub down previously painted surfaces thoroughly, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Pre 1960's painted surfaces may contain harmful lead, so special precautions must be taken
- Any surface defects should be filled with the appropriate filler
Application
Always follow the manufacturer's instructions found on the tin. We recommend to test a small area before painting the entire surface to ensure compatibility
- Stir thoroughly before use.
- Start with 1 coat of in the appropriate colour, and allow at least 6 hours for it to dry before applying the Dulux Trade High Gloss.
- If you need new work to dry quickly, , available in white only, can be used as an alternative to the Dulux Trade Undercoat
- Apply 1 or 2 coats with a brush or roller only. Do not spray.
- If you need to apply a second coat of High Gloss, ensure that you leave at least 16 hours drying time between coats.
- On rough or textured surfaces, or when using special process colours (see appropriate Dulux Trade colour literature), 2 coats will be required to achieve full opacity.
