Overview
With excellent coverage of up to 17m2 per litre, Dulux Trade Vinyl Matt is a high opacity, water based matt emulsion paint that gives a top quality finish. It's easy to apply, with a smooth flow and is suitable for all normal interior walls and ceilings. Vinyl Matt can be applied with a brush, roller, conventional or airless sprayer.
- Excellent coverage and smooth flow
- High quality finish
- Easy application
| Area | Interior walls and ceilings |
| Recommended Use | Interior walls and ceilings |
| Base | Water Based |
| Coverage | Up to 17m² per litre |
| Drying Time | 2-4 Hours |
| Re-Coat Time | 2-4 Hours |
| Recommended Coats | 1-2 Coats (New or bare surfaces - 3 Coats) |
| Application Method | Brush, Roller, Conventional or Airless Spray |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from equipment and clean with water. |
Preparation
For best results, make sure that surfaces to be painted are sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and salts. Remove all loose and defective paint.
- Pre-1960s paint surfaces over wood and metal may contain harmful lead, so special precautions should be taken when painting these surfaces.
- Wash where necessary to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Surfaces that remain powdery after thorough preparation should be sealed with an appropriate .
- Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.
Application
Always follow the manufacturers instructions found on the tin, it is recommended that a small test area is applied before painting the entire surface to ensure compatibility.
- Stir thoroughly before use.
- Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint).
- Normal finishing is 2 full coats of Dulux Trade Vinyl Matt, but on previously painted surfaces in good condition in similar colours, 1 coat may be enough.
