Overview

Enhance the natural beauty of wooden floors whilst giving them long-lasting protection against everyday wear. The Diamond Hard formulation offers the toughest finish that will protect against knock, scuffs and spills. It's fast drying and ready to recoat in only 2 hours to have minimal disruption to your home and has a low odour so your home won’t smell of varnish for days on end. Available in a range of different colours, it's non-yellowing so it stays brighter for longer. Suitable for unvarnished and previously varnished floors.

• Tough and durable finish
• Non yellowing and low odour
• Available in a range of colours and sheens
• Quick drying and recoat times
• Enhances the beauty of the floor

Preparation

For the best results always thoroughly prepare the surface. Ensure the surfaces to be painted are clean dry and free from dust and dirt.

• Unvarnished floors - Sand along the floorboards with a 120 grit sandpaper and remove any dust by vacuuming and wiping with white spirit.
• Fill any holes or imperfections with .
• Varnished floors - Light sand the surface with a 120 grit sandpaper, and ensure to remove any old flaking varnish to leave you with a smooth surface.
• Let the dust settle, vacuum it up and then wipe down your floor with white spirit.

Application

We always recommend to test a small inconspicuous are to ensure you are happy with the finished results. Please note colours may vary on screen.

• Thoroughly stir the varnish to ensure a consistent colour.
• Start in the corner furthest from the door, work along the length of two floorboards at a time.
• Once the first coat is applied allow to dry for two hours and apply a further two coats with two hours between every coat.
• Before starting the third coat, very lightly sand along the length of the floorboards with a 240 grit sandpaper.
• Once cleaned and a third coat has been applied the floor can be walked on after two hours.
• Allow 24 hours before bringing furniture back, the floor will be diamond hard after 72 hours.